As the quality of BLX racquet grommets are not good, its hard to fit all grommets in place. Any Si Hing could suggest methods to fit the grommets easily. I used heat gun extends the plastic links in order to make each grommet vertical and fitted in, but failed. The long grommet at racquet neck even blocked and damaged with force. Lubricate oil, grease and silicon grease had been use, but in vain. Please help.
Thank you wai.
I will use heat gun and try again slowly. Another thing I would try is to slightly sharpen each grommet tube end heat then and let it passes through the inside grommet hole. Unlike the old K factor blend grommet set, these BLX grommets are harder and easy to break.
Join the discussion everybody, let's brain storm and find out which is good for fitting grommets.